· Chris Hammond
Last Updated

A little success, found 1 of 3 missing screws, AND the car started, twice!

An update on the 240z with video of me working on the car getting it started

So last night after work I came home with the intention of trying to figure out why the car wouldn’t start. My intentions were to check the positioning of the 36-1 wheel for the VR sensor that drives the Megasquirt/EDIS setup. After checking the positioning of the sensor I was going to do a compression check on the motor. Well I threw those intentions out of the window, I wanted to see if after charging the battery the night before things would be better as the changes from the night before were not completely tested due to the drained battery.

Well wouldn’t you know, the car started! And not just once, but twice! It actually even ran for a bit, assuming I had my foot on the pedal, otherwise it would die, but that didn’t concern me, not yet. So it ran, and I have megasquirt log files to prove it! I went to try to start it again, and got nothing, but this time it wasn’t timing, it wasn’t motor, it was the starter. The starter wouldn’t turn over, it would only click, which made things really weird because I hadn’t had that problem before. Rather than trying to make it work I simply decided to pull the starter out of the car and check it out, it looked okay.

Starter after pulling it out

I decided I would take a picture of the flywheel, and as soon as I took a picture I noticed something shining off the flash.

Starter won't turn over, wonder why?

As soon as I took a second look at it I knew exactly what it was. Here’s a photo of it after I pulled it from the flywheel.

This went missing 3 weeks ago

Want to know what that is? That is one of the three missing screws from the starter when it fell apart a few weeks ago

whoops by you.

So with that revelation I decided that I would call it a night from trying to make the car run. I worked on cleaning up some things in the garage, I need to get it up on jack stands and find the remaining 2 screws which I believe are also still in the bell housing. Perhaps this weekend, or early next week I’ll get it up and find them.

I also started disassembling the old block, crank and pistons as I need to get rid of those here soon, especially if we find out about our home offer soon (https://www.going2colorado.com)

Here’s a brief video of today’s work, nothing too fascinating, next time I have it running I’ll get audio!

Share:
Back to Blog

Related Posts

View All Posts »
Looking for another 240z

Looking for another 240z

Discover the history, design, engine performance, and production details of the 1973 Datsun 240Z in our blog post. We delve into the captivating story of this timeless sports car, known for its sleek body, powerful engine, and its pivotal role in the world of Japanese sports cars. Ideal for classic car enthusiasts or potential buyers.

Looking for another 240z

Looking for another 240z

This blog post shares our desire to own another Datsun 240z. If you're located in or near the St. Louis area and have an old Datsun, connect with us as we're interested in discussing further.

Project240z 10 Years Later

Project240z 10 Years Later

Relive the unfortunate autocross run of the classic 240z at Gateway Motorsports Park ten years ago. The blog post unfolds the dramatic event and shares a cautionary tale for car enthusiasts about the importance of proper tuning before competition.